Lightweight Construction Methodology
English | 中文简体
Lightweight Construction Methodology (LCM) was developed in Europe over 60 years ago and has since then been on the international market for more than 20 years. LCM has been used in the building industry for well over one hundred thousand apartments and houses in over 40 different countries. Machines, foaming agent, training and technology transfer
Foam Concrete
Introduction

About LCM

DANNY- Half Slab System and Fire Resistant Party Walls
Application
Benefits
FAQ
Charts
Foam Generator & LCM Mixer
Casting of Wall
Casting a House
LCM Corepanel
LCM Coreply Formwork
LCM Formwork System
Raising Foundation
Blocks & Panels
Road Barries & Sound Barrier
Pavers & Cornices
Any Pattern Casting
Walls, Drains & Foundations
Soft Ground & Bridge Approach Applications
Highrise External Wall Panels
Screeds, Floor Stampings & Road Base
Photo of Projects
Video
Research & Development
Conclusion
Contact
> Highrise External Wall Panels

Lot 78, Jalan Beserah, ( Opposite TAN CHONG - NISSAN Showroom ), 25300 Kuantan, Pahang, Malaysia.
Tel : +6-09-5162911 or +6-09-5162912 Fax : +6-09-5162913
Email : alcm8@pd.jaring.my or alexliew@streamyx.com
LCM - Panel casting at Jakarta, the job requires the casting of Lightweight Concrete 1250 density mix, the specification only allows panels with a maximum 160 kg per m2 of 100mm thick pre-cast wall panels.



As Jakarta's is in an earthquake area, reinforcement with a layer of BRC was used.



Casted panel is ready for skim coating and lifting 28 hours later and painted and ready to be lifted to trucks and transported to site for lifting to be put in place.



A total of 2400 panels was pre-cast in record time, indicating LCM success. The total weight of the panels was reduced by 45 % compare to bricks or blocks. Cost and casting time was reduced.



Copyright © 2002-2003 Liew Chung Meng (0008236-V). All rights reserved. Designed by Website Solution.